Table of Contents
Advertisement
When charging, the LCD shows
xx% complete" (where "xx" is a number value).
When the device is charged, the LCD shows:
●
(if the device is on)
●
and the message "Fully charged" (if the device is off).
Charging Through Your Computer
Note: If you'll be using USB for data transfer (and not just for charging the device), you must
install the device driver. (See
Note: If you're using Mac OS X 10.4.x, after you connect the device you may see a warning
message that your computer is running on UPS backup battery and that you should
perform a computer shutdown. You can continue with your work. To prevent this
message from being displayed, install the device driver. (See
Connection.)
1. Make sure your computer is turned on.
2. Insert the larger end of the micro-USB cable into your computer.
3. Insert the other end of the cable into the micro-USB port on the side of your device.
When charging, the LCD shows
Device Basics
and, if the device is off, displays a message "Charging...
Making a Tethered
Connection.)
.
26
Making a Tethered
Advertisement
Table of Contents
