Getting Help - Sierra Wireless 4G LTE Tri-Fi Hotspot User Manual

Activating Your Device Through the Activation Wizard
If you haven't set up with Sprint a wireless account that is associated with your Sierra Wireless
4G LTE Tri-Fi Hotspot, the Device Self-Activation wizard is automatically displayed.
To activate your device through the Device Self-Activation wizard:
1. Make sure you're in 3G coverage and the signal strength is strong.
2. Follow the onscreen instructions displayed in the Device Self-Activation wizard.
If the activation fails, the following options may be presented:

Retry the activation.

Reset the device to its default settings (after which the device will restart) and then
retry the activation.

Cancel. You should retry the activation at a later time.
If, after trying the above options, you haven't successfully completed the activation, contact
Sprint Customer Service and have the following available:
● Your billing information.
● MEID of the device (displayed on the packaging and inside the battery compartment).
To manually start the Device Self-Activation wizard (for example, at a later time):
1. Make sure you're in 3G coverage and the signal strength is strong.
2. In the address bar of your Web browser, type http://192.168.0.1 to display the home
page.
3. In the Admin Login section (in the upper left area of the home page), enter the
administrator password (1–20 characters/numbers). (The default password is
"password".)
4. Click OK.
5. Click Advanced settings (
6. Click Device > About.
7. Click Launch Activation Wizard.

Getting Help

Learn where you can get more information or assistance.
Get Started
).
19