Turning Your Device Off; Setup Pages - Sierra Wireless 4G LTE Tri-Fi Hotspot User Manual

4g lte tri-fi hotspot
Hide thumbs Also See for 4G LTE Tri-Fi Hotspot:
Table of Contents

Advertisement

Similar to the virtual device, the Mini Window reflects most of the icons and text displayed on
the real device.
To save space on your monitor, you can close the home page and move the Mini Window to the
side of your monitor. Then you can use the window to keep an eye on the status of your device
and connection. (To reopen the home page, click the Home link.)
If you're logged in, the window has a Connect or Disconnect button, and a Power Off button.

Turning Your Device Off

There are several ways you can turn your device off.
● From the home page:
Make sure you're logged in to the home page.
Click Power Off (below the Virtual Device).
● From the Mini Window:
Make sure you're logged in to the home page.
Click Power Off.
Tip:
You can also turn the device off by pressing and holding the power button
the device turns off.

Setup Pages

At any time, you can rerun the device setup, if required.
The Welcome to your Sierra Wireless™ 4G LTE Tri-Fi Hotspot window opens in two cases.
● Automatically, as part of the initial setup of your newly purchased device.
● When you click Admin Setup (
applicable) and then click Submit (you must be logged in).
Note: This window displays the administrator password and the address of the device home
page. Please remember this information or write it down in a safe place.
This window provides several options.
● To keep the default settings of the device, select one of the following:
The Internet — This connects you immediately to the Internet.
My Sierra Wireless™ 4G LTE Tri-Fi Hotspot's home page — From the home
page you can view the device status and customize settings.
Browser Interface Home Page
) from the home page, make changes (if
45
until

Advertisement

Table of Contents
loading

Table of Contents