Sierra Wireless 4G LTE Tri-Fi Hotspot User Manual page 83

● Active Network — This is the network that is currently being used for your data
connection: 3G, 4G, 4G LTE, or none.
● Network Operator — This field shows the carrier that your device was activated with.
● Session Duration — The session duration indicates how long you've been connected to
the network.
● Session Total Data — This indicates the amount of data transferred over the lifetime of
the device (by network type) and in the current session.
● Work Mode — This indicates the 3G and 4G activation/provisioning status of your
device and account. Technical support staff may request this value from you.
● LTE Enabled — This indicates whether 4G LTE is enabled on the device.
● WAN Mode — This setting specifies the network(s) to connect to, and in what order.

3G Preferred — The connection can be established to either 3G or 4G; if both are
available, 3G is used.

4G Preferred — The connection can be established to either 3G or 4G; if both are
available, 4G is used. This setting is recommended if your service provider has no
data limit for 4G, but does for 3G, or you want to take advantage of the faster data
transfer speeds of 4G.

3G Only — The connection can be established only to 3G. (If you don't have 4G or
4G LTE coverage, you can save power by selecting 3G Only.)

4G Only — The connection can be established only to 4G.
Note: The following options are not available if 3G Only is selected.
● 4G Mode — This setting specifies the 4G network(s) to connect to.

LTE + WiMAX — When connecting to 4G, connection can be established to either
4G WiMAX or 4G LTE; if both are available, 4G LTE is used (unless the 4G WiMAX
signal is significantly better than the 4G LTE signal).

LTE Only — When connecting to 4G, connection can be established only to 4G LTE.

WiMAX Only — When connecting to 4G, connection can be established only to 4G
WiMAX.
● Connect Automatically — You can set your device to connect to the network when the
device powers on. To prevent this from happening when you're roaming, also select
Disable when roaming.
Device Settings 82