Wps Pin Chksum Error; Wps Pin Mismatch. The Pin Used Did Not Match The Pin Of The Device; Wps Timeout. The Wps Session Was Terminated. Press Wps Button To Try Again; Wps Multiple Sessions Error - Sierra Wireless 4G LTE Tri-Fi Hotspot User Manual

WPS PIN Chksum Error

This message may occur when the PIN that you've entered (after having selected Use PIN
method) is incorrect. Make sure you have the correct PIN for the device you're adding to the
network.
WPS PIN Mismatch. The PIN used did not match the PIN of the
device
This message may occur when the PIN that you've entered (after having selected Use PIN
method) is incorrect. Make sure you have the correct PIN for the device you're adding to the
network.
WPS Timeout. The WPS session was terminated. Press WPS
button to try again
WPS did not start in the expected time. Make sure you start WPS on both the wireless device
and the Sierra Wireless 4G LTE Tri-Fi Hotspot. (See

WPS Multiple Sessions Error

This message occurs when more than one WPS session is in progress.
Note: For security reasons, only one device is allowed to join, through the PBC (Push Button
Configuration) method, the network at a time. If the Sierra Wireless 4G LTE Tri-Fi
Hotspot detects simultaneous PBC connection requests from multiple devices in the past
two minutes, it blocks PBC.
If you're using WPS to add more than one device to your network, finish adding one device
before you add the next one.

Cannot Connect Through USB

If your computer cannot connect to the Sierra Wireless 4G LTE Tri-Fi Hotspot through the
micro-USB cable, go through the following steps.
1. Make sure that you've installed the device driver, as described in
Connection.
2. Connect to the Sierra Wireless 4G LTE Tri-Fi Hotspot through Wi-Fi.
3. Make sure that USB Tethered Networking is set, in Advanced settings > Router >
Basic, to Enable.
4. Restart the device.
Troubleshooting
Connecting Through
154
WPS.)
Making a Tethered