Sierra Wireless 4G LTE Tri-Fi Hotspot User Manual page 116

● Use both uppercase and lowercase letters
To change the Wi-Fi password:
1. Log in to the home page.
2. Click Advanced settings > Wi-Fi > Security.
3. In the Wi-Fi Password field, type the password; the maximum length depends on the
Wi-Fi security type that you've selected.

None — No security is used (no password is required to access the Wi-Fi network);
this setting is not recommended. Anyone may access your device and use your
Internet connection. (You are responsible for payment for data usage fees.)

WEP 64 bit - Shared — The password must be 5 ASCII characters.

WEP 128 bit - Shared — The password must be 13 ASCII characters.

WEP 64 bit - Open — The password must be 5 ASCII characters.

WEP 128 bit - Open — The password must be 13 ASCII characters.

WPA-Personal TKIP — The password must be 8 to 63 ASCII characters.

WPA-Personal TKIP/AES — The password must be 8 to 63 ASCII characters.

WPA2-Personal AES — The password must be 8 to 63 ASCII characters.

WPA2-Personal TKIP/AES — The password must be 8 to 63 ASCII characters.

WPA/WPA2 Personal — The password must be 8 to 63 ASCII characters.
4. Click Save.
Wi-Fi Password Reminder
To display the Wi-Fi password on the LCD of the device when the Wi-Fi Password Reminder
feature is enabled:
1. If the LCD is dark (no text or icons are displayed):

Make sure the LCD is enabled. (See

Briefly press the power button
2. Press the navigation button
The information is displayed for approximately 20 seconds. To clear the information before that,
briefly press the power button
Configuring the Wi-Fi Network
Turning the LCD On or
on the device.
on the device.
on the device.
115
Off.)