Physical Characteristics - HP Integrity rx2600 Operation And Maintenance Manual

Overview
Feature
iLO Management
Processor (iLO MP)
card
(standard on the
rx2600 server;
optional on the
zx6000
workstation)
Rear connectors
(labeled)
LAN connectors

Physical Characteristics

This table lists the standard configuration as shipped, excluding the keyboard and monitor.
Weight:
• Pedestal server
• Rack-mount server
Dimensions (DxWxH):
• Pedestal server
• Rack-mount server
Footprint (pedestal)
Rack units (rack-mount)
16
Description
25-pin serial connector (with console/remote/USP extensions; requires
breakout cable)
10/100 BT Management LAN
15-pin VGA connector
• The graphics display port functionality on the iLO MP Card is not
supported on zx6000 workstations with an AGP graphics card installed;
all other HP iLO MP Card functionality is supported
Four USB connectors:
• High speed 480 Mb/sec. capable
• Full speed 12 Mb/sec. and low speed 1.5 Mb/sec.
• HP-UX supports HP USB keyboard and mouse
• Linux supports all 1.1 USB devices
• Windows supports USB keyboard and mouse,
as well as other USB devices with driver support
Two 9-pin serial ports:
• UART 16550 buffered
• RS-232-C
External 68-pin LVDS/SE SCSI connector (see SCSI controller above)
• 10/100 BT Management LAN
• 10/100/1000 BT Gigabit LAN
• 10/100 BT iLO MP Card LAN (on servers with iLO MP card)
Minimum: 22.4 kg (49.4 lb.)
Maximum: 25.5 kg (56.3 lb.)
Minimum: 17.5 kg (38.6 lb.)
Maximum: 22.2 kg (49.0 lb.)
67.5 cm (26.6 in.) x 29.5 cm (1 1.6 in.) x 49.4 cm (19.5 in.)
67.9 cm (26.8 in.) max. x 48.3 cm (19.0 in.) x 8.6 cm (3.4 in.)
0.2 m (2.1 sq. ft.)
2
2U
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide