System
LED
LED1
LED2
BMC Faults
Temperature Faults
Power Supply Errors
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
LED3
LED4
BMC firmware is damaged
System board FRU inventory
device inaccessible
External air temperature too
high
VRM or power pod fault
Power Supply 1 fault
Power Supply 2 fault
12V out of range (power supply
interface fault)
Problem
Power off and unplug
the server. Wait 20
seconds, then plug in
and restart the server. If
the error repeats,
replace the system
board.
Replace the system
board.
Make sure nothing is
blocking the airflow.
Place the server in an
air-conditioned room.
View the SEL for
additional information.
For more help, contact
your HP Support
Engineer.
Replace the power
supply.
Troubleshooting
Solution
121