HP Integrity rx2600 Operation And Maintenance Manual page 108

Removing and Replacing Components
1. Insert the hard drive backplane onto its four chassis standoffs and slide it to the left as you
face it. This locks the hard drive backplane in place.
2. Screw in the two backplane mounting screws.
3. Connect the two SCSI cables.
4. Connect the backplane power cable.
5. Lower the fan power bridge until it snaps in place.
6. Replace the PCI/AGP cage in the server and secure it.
7. Replace the server covers, and reconnect all of the power and external cables.
108 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide