Server Features - HP Integrity rx2600 Operation And Maintenance Manual

Overview

Server Features

The rx2600 and zx6000 are available in many configurations. The table below provides an
overview of the server features.
■
For a complete and current list of supported parts, components, and accessories, see:
http://partsurfer.hp.com
■
For information on the specific server features and components on servers with the
following:
❏
Firmware revision 1.9 or lower, use the EFI
❏
Firmware revision 2.0 or higher, see "Advanced System Configuration Menu" (page 38).
Feature
Processor
Firmware
Operating system Red Hat Linux Advanced Workstation 2.1 for the Itanium® Processor
Main memory
Hard drives
14
Description
Single or dual-processor
• Intel Itanium 2 processor:
• 900 MHz with 1.5 MB cache on chip
• 1 GHz with 3 MB cache on chip
• 1.3 GHz with 3 MB cache on chip
• 1.5 GHz with 6 MB cache on chip
8 MB flash EEPROM
Configured using Extensible Firmware Interface (EFI)
HP-UX 1 1i v2
Microsoft Windows:
• XP 64-Bit Edition Version 2003 (zx6000 workstation)
• Server 2003, Enterprise Edition (Integrity rx2600 server)
Capacity:
• zx6000 workstation: 512 MB minimum (2 x 256 MB)
• rx2600 server: 1 GB minimum (4 x 256 MB)
• 24 GB max.
Type: PC2100 ECC registered DDR266 SDRAM
Slots: Twelve DIMM slots
Modules supported: 256 MB, 512 MB, 1 GB, 2 GB
Bus Bandwidth: up to 8.5 GB/s
Internal bays: 3 hot-plug SCSI disk bays
Hard disk drives supported:
• 36 GB (10k or 15k rpm)
• 73 GB (15k rpm)
• 146 GB (10k rpm)
Maximum internal storage: 438 GB
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
info
command.