Physical and operating specifications
This chapter provides physical and operating specifications for the HP ProLiant DL180se G6 server.
Specifications include:
System unit
Table 30
Hardware Specifications
Item
Processor socket
Processor
Chipset
Hardware monitoring device
Gigabit ethernet controller
Onboard storage controller
ODD & Floppy interface
Embedded video controller
I/O subsystem
Memory
Default media storage
Optical disc drive
I/O ports
Components
Intel FCLGA1366 socket
2P Intel Xeon processor with integrated memory controller
Tylersberg-36D/ICH-10R
ServerEngines Pilot 2 management controller
•
HP NC362i GbE controller for NIC
•
IPMI card LO100 support
Integrated ICH10R SATA (4-port)
•
Optional Optical Disc Drive (SATA)
•
Optional Floppy (USB only, USB key)
ServerEngines Pilot 2 management controller
•
One PCIe x16 links with x16 slot 1a + PCIe x4 links with x4
slot 1b
•
One PCIe x4 links with x4 slot 2
Eighteen DDR3 800/1066/1333 MHz RDIMM/UDIMM slots, up
to 144 GB
•
Four bays hot-plug HDD cage for 3.5" SAS or SATA drives
•
Eight bays hot-plug HDD cage for 3.5" SAS or SATA drives
•
Eight bays hot-plug HDD cage for 2.5" SAS or SATA drives
•
Twelve bays hot-plug HDD cage for 3.5" SAS or SATA drives
•
Twenty-five bays hot-plug HDD cage for 2.5" SAS or SATA
drives
One slim optical disk drive bay for optical disc drive on the front (4
3.5" HDD model and 8 3.5" HDD model)
USB 2.0 ports (two rear USB ports, one internal USB port, two front
USB ports), video port, serial port, GbE port, and dedicated
management port(optional).
Physical and operating specifications 140