HP Integrity rx2600 Operation And Maintenance Manual page 112

Server and workstation
Hide thumbs Also See for Integrity rx2600:
Table of Contents

Advertisement

Troubleshooting
System LED
Blinking orange (1/sec.)
Blinking red (2/sec.)
For system alerts of levels 3-5, the attention condition on the LED can be cleared by accessing
the logs using the
System alerts of level 7 indicate that the server cannot complete the power-on self test (POST).
See the SL error logs for additional error information. Once corrective action is completed, the
fault LED turns off.
NOTE: Always check the iLO MP Status Logs in the case of a blinking orange or red system
LED before replacing any hardware.
System Logs (SL) Logs
To view the SL logs for detailed diagnostic information, use the iLO MP
1. Access the iLO MP command prompt.
sl
2. Run the
SL
Event Log Viewer:
Log Name
----------------------------------------------------------------
E - System Event
F - Forward Progress
B - Current Boot
P - Previous Boot
L - Live Events
C - Clear All Logs
Enter your choice or [Q] to Quit:
e
3. Select
to review the events. The Event Log Navigation menu appears:
Set up alert filter options on this buffer? (Y/[N])
Log Name
-------------------------------------------------------------------
E - System Event
Event Log Navigation Help:
+
-
<CR>
1 12
State
Attention:
• Alerts of levels 3-5 detected in the iLO MP logs.
• The LED turns off once the event log is read.
Fault:
• System Alert 7 Detected. LED blinks until the problem is
resolved and the server boots successfully or until it is
manually turned off with the iLO MP dc command.
• Fatal hardware error detected by BMC. LED blinks until
problem is corrected.
sl
dc
or
command available in the iLO MP command mode.
command. The Event Log Viewer menu displays:
Entries
9
129
82
0
Entries
410
View next block
View previous block (backward in time, e.g. from 3 to 2)
Continue to the next or previous block
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
% Full
Latest Entry
1 %
29 Oct 2002 19:15:05
3 %
% Full
Latest Entry
47 %
18 Feb 2003 09:38:10
(forward in time,
sl
command:
e.g. from 3 to 4)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zx6000

Table of Contents