Select Active Console Output Devices - HP Integrity rx2600 Operation And Maintenance Manual

Select Active Console Output Devices

Use this option to define the devices that display output from the server console. This list
normally includes the VGA monitor and a serial console port for directing output to a terminal
emulation package.
NOTE: If you install a modem in the server, make sure you disable the modem serial console
port in both the Active Console Input and Active Console Output device lists.
NOTE: Some operating systems support multiple consoles, such as a simultaneous serial and
VGA output. See your OS documentation to determine how many consoles are supported with
the server. Multiple consoles are not supported for HP-UX or Windows (use the Smart Setup CD
to switch between COM A and the iLO MP on Windows systems).
For example:
Select the Console Output Device(s)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100)
* Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(VtUtf8)
Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(PcAnsi)
Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100)
* Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+)
Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(VtUtf8)
Acpi(HWP0002,700)/Pci(2|0)
* Acpi(HWP0003,0)/Pci(0|0)
Save Settings to NVRAM
Exit
* indicates a currently selected device.
This menu is identical to
different configurations for output and error console. For correct operation, do the following:
■
When changes are made to either output or error console menus, the identical change must
be made in both menus.
■
When changing serial devices, changes must be made to output, input, and error menus for
proper operation.
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
Console Error Devices
. The zx6000/rx2600 does not support
System Configuration
35