HP Integrity rx2600 Operation And Maintenance Manual page 52

System Configuration
Command
RS
TC
General iLO MP Configuration Commands
General configuration commands enable you to perform general configuration tasks, such as
configuring automatic system restart and setting the default configuration.
Command
CG
DC
FW
ID
IT
SO
UC
XD
iLO MP Port Configuration Commands
Port configuration commands enable you to configure LAN/WEB, remote/modem, and local
ports.
NOTE: If you are not connecting anything to a port, hardware flow control should be off.
Command
Serial Port Configuration
CA
SA
PG
LAN Configuration
SA
LC
52
Description
System reset from RST signal
Transfer of control; system reset through INIT signal
Description
Generate RSA key pair of self-signed certificate
Default configuration
Upgrade the iLO MP firmware
System identification
Inactivity timeout settings
Configure security options
User configuration
Diagnostics or reset of iLO MP
Description
Configure serial ports
Enable/disable remote and modem access
Paging parameter setup
Enable/disable LAN and web access
LAN configuration menu
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide