1. Replace the top cover:
a. Align the front edge of the top cover with the alignment mark on the optical drive bay.
Top Cover Alignment Mark
b. Place the top cover on the chassis and slide it toward the front of the server until the blue
release lever snaps in place.
Replacing the Top Cover
To replace the side cover, follow these steps:
2. Replace the side cover:
a. Align the side cover mounting holes with the matching tabs on the server chassis.
b. Close the cover until it snaps onto the server chassis.
Replacing the Side Cover
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
Removing and Replacing Components
67