Disconnect The Fan And Backplane Power Cables; Unscrewing The Backplane Mounting Screws; Remove The Hard Drive Backplane - HP Integrity rx2600 Operation And Maintenance Manual

1

Disconnect the Fan and Backplane Power Cables

4. Disconnect the SCSI cables (1) and unscrew the backplane mounting screws (2).

Unscrewing the Backplane Mounting Screws

5. Remove the hard drive backplane by sliding it in the direction of the arrow (1) and pulling it
outward from its standoff posts (2).
1

Remove the Hard Drive Backplane

Replacing the Hard Drive Backplane
To replace the hard drive backplane, follow these steps:
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
1
Removing and Replacing Components
2
2
2
107