Dual-Port 2Xp Pci; Xp Pci Host Interface Card Specifications; Xp Pci Card Physical Characteristics - HP Cluster Platform Interconnects v2010 Manual

Myrinet system interconnect guide
Hide thumbs Also See for Cluster Platform Interconnects v2010:
Table of Contents

Advertisement

Table 2-1 shows the single-port XP PCI card's technical specifications.
Table 2-1: XP PCI Host Interface Card Specifications
Feature
XP PCI card
Bus speed
Memory
Memory bandwidth
Processor
Data rate
Fiber port physical
Fiber port data rate
EEPROM
Table 2-2describes the XP PCI card's physical and environmental characteristics.
Table 2-2: XP PCI Card Physical Characteristics
Characteristic
Dimensions (excluding
faceplate)
Mass
Power requirement
Environmental, operating
Environmental, nonoperating

2.3 Dual-port 2XP PCI

The dual-port 2XP PCI NIC (Figure 2-3) is the Myricom Rev. E card. It supports
two X-port interfaces and one PCI-X interface.
Specifications
64-bit PCI-X
PCI low-profile PCI short
card
75-133 MHz PCI-X slots
66 MHz (3.3V) PCI slots
2 MB
1,800 MB/s
225 MHz RISC
490 MB/s
LC-type optical connector,
50/125 multimode fiber pair
2.0+2.0 Gb/s data rate,
2.5+2.5 GBaud signaling
512 KB
Specifications
6.4 cm high, 6.4 cm long, 2.2 cm total thickness
0.082 kg
3.3V from the PCI bus, 1.8A (6W) maximum
0C to 50C up to 10,000 foot altitude
Relative humidity 15% to 80% @ 50C
-40C to 70C
Relative humidity 90% @ 65C
Notes
LANai XP
User-level bidirectional data
rate.
Class I Laser Product (no
hazard)
Serial number, MAC
address, product code, and
other information
PCI cards
2-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cluster platform

Table of Contents