Software Features; At-S45 Management Software - Allied Telesis AT-9410GB Installation Manual

Software Features

AT-S45
Management
Software
The following sections describe these software features:

AT-S45 Management Software

G
Spanning Tree Protocol (STP)
G
Tagged and Port-based Virtual LANs (VLANs)
G
Quality of Service
G
Dynamic Host Configuration Protocol (DHCP)
G
Port Mirroring
G
Port Trunking
G
Port Security
G
Note
All of the features described here are further described in the
AT-S45 Management Software User's Guide.
The AT-9410GB Gigabit Ethernet Switch comes with the AT-S45
management software pre-installed. This management software comes
with default values for all the operating parameters for the switch. In
some network environments, the default settings might not need to be
changed, allowing you to use the switch as an unmanaged switch.
If you want to manage the switch and change or monitor the operating
parameters, you must access the AT-S45 management software. Some
of the management software functions include assigning the switch an
IP address and subnet mask, creating VLANs and port trunks, and
activating and configuring the Spanning Tree Protocol parameters.
The management software's interface consists of menus and prompts
that make it easy for you to configure the switch and view performance
and status information.
There are four different ways to access the switch's management
software:
RS-232 Terminal Port
G
Web Browser
G
Telnet Application Protocol
G
SNMP management program
G
AT-9410GB Installation Guide
23