Allied Telesis AT-9410GB Installation Manual page 55

3. Set the terminal or the terminal emulation program to the following
settings:
Emulation mode: VT100
G
Baud rate: 9600
G
Data bits: 8
G
Parity: None
G
Stop bits: 1
G
Flow control: None
G
Key mode: Terminal keys
G
Note
These are the default settings for the RS-232 Terminal Port. They are
for a DEC VT100 or ANSI terminal or an equivalent terminal
emulation program.
When the terminal session starts, it displays the management software's
login prompt, shown in Figure 29. Enter the login name and password.
The default login name and password are both "manager." For
instructions on how to change the password, refer to the AT-S45
Management Software User's Guide.
AT-9410GB Management System Version 1.00E
Local - Console
Allied Telesyn International Corp.
Copyright, 2001
==================================================
Login Menu
Login: manager
Password: _
Figure 29 AT-S45 Login Prompt - Local Management Session
AT-9410GB Installation Guide
55