Required Cables - Allied Telesis AT-9410GB Installation Manual

Required Cables

Table 7 contains the specifications of the cables required for the twisted
pair ports on the AT-9410GB Gigabit Ethernet Switch.
Table 7 Media Types and Distances
Speed
10 Mbps
100 Mbps
1000 Mbps
Note
The ports on the AT-9410GB switch are IEEE 802.3ab-compatible
and are configured automatically by the switch as MDI or MDI-X
when connected to a 10 Mbps or 100 Mbps end node. This allows
you to use either a straight-through or cross-over cable.
Note
For cabling specifications for an optional GBIC module, refer to the
GBIC Installation Guide included with the module.
Category
Category 3 or better
100-ohm shielded or
unshielded, straight-
through or crossover
twisted pair cable
Category 5 or
Category 5E
(Enhanced) 100-ohm
shielded or
unshielded, straight-
through or crossover
twisted pair cable
Category 5 and
Category 5E
(Enhanced) 100-ohm
shielded or
unshielded, straight-
through twisted pair
cable
AT-9410GB Installation Guide
Maximum Distance
100 m (328 ft.)
100 m (328 ft.)
100 m (328 ft.)
43