10/100/1000 Mbps Port Leds - Allied Telesis AT-9410GB Installation Manual

10/100/1000
Mbps Port LEDs
LED
1GbE
10/100Mbps
ACT (Activity)
FDX (Full Duplex)
10GbE
10/100Mbps
ACT
FDX
Figure 8 10/100/1000 Mbps Port LEDs
The 10/100/1000 Mbps port LEDs on the front panel display port status
information for Ports 1 through 10. Each 10/100/1000 Mbps port has
four LEDs.
Table 5 describes the 10/100/1000 Mbps port LEDs.
Table 5 10/100/1000 Port LEDs
State Description
Green
A 1000 Mbps link has been established.
OFF No link has been established or a 10/100 Mbps link
has been established.
Green
A 10/100 Mbps link has been established.
OFF No link has been established or a 1000 Mbps link
has been established.
Flashing Green There is activity on the port.
Green A link has been established but there is no activity
on the port.
OFF No link has been established.
Green The port is operating in full-duplex mode.
Flashing Green The port is operating in half-duplex mode with
data collisions occurring on the port.
OFF No link has been established or the port is operat-
ing in half-duplex mode with no data collisions.
Port LEDs
AT-9410GB Installation Guide
19