Starting A Local Management Session - Allied Telesis AT-9410GB Installation Manual

Starting a Local Management Session

The procedure in this section explains how to start a local (out-of-band)
management session by cabling the RS-232 Terminal Port on the front
panel of the switch and setting the appropriate terminal values. You can
use a local management session to configure the switch's operating
parameters and view performance and error statistics.
To start a local management session, perform the following procedure:
1. Connect one end of the null modem management cable to the RS-
232 Terminal Port on the front panel of the switch, as shown in Figure
28.
Figure 28 Connecting the Null Modem Management Cable to the RS-
2. Connect the other end of the cable to an RS-232 port on a terminal or
a personal computer with a terminal emulation program.
232 Terminal Port