Software Features; At-S39 Management Software - Allied Telesis AT-8024 Installation Manual

Product Description

Software Features

AT-S39
Management
Software
24
The following sections describe these software features:

AT-S39 Management Software

G
Enhanced Stacking
G
Spanning Tree Protocol (STP)
G
Tagged and Port-based Virtual LANs (VLANs)
G
Basic VLAN Mode
G
Quality of Service
G
BOOTP and Dynamic Host Configuration Protocol (DHCP)
G
Port Mirroring
G
Port Trunking
G
Port Security
G
Note
All of the features described here are further described in the
AT-S39 Management Software User's Guide.
The AT-8024 and AT-8024GB Fast Ethernet Switches come with the
AT-S39 management software pre-installed. This management software
comes with default values for all the operating parameters for a switch.
In some network environments, the default settings might not need to
be changed, allowing you to use the switch as an unmanaged switch.
If you want to manage the switch and change or monitor the operating
parameters, you must access the AT-S39 management software. Some
of the functions that you can do with the management software include
assigning the switch an IP address and subnet mask, creating VLANs and
port trunks, and activating and configuring the Spanning Tree Protocol
parameters.
The management software's interface consists of menus and prompts
that make it easy for you to configure the switch and view performance
and status information.
You can access the switch's management software four ways:
RS-232 Terminal Port
G
Web Browser
G
Telnet Application Protocol
G
SNMP management program
G