Installing Circuit Packs In The G650 Media Gateway; Circuit Pack Installation; Circuit Pack Slot Loading - Avaya G650 Installing

Installing circuit packs in the G650 Media
Gateway

Circuit pack installation

Circuit pack slot loading

To load circuit packs:
1
Load all port circuit packs. See
for the recommended circuit pack layouts. Slots in the G650 Media Gateway are numbered from
left to right beginning with slot 0. See
34.
Table 6: G650 Media Gateway circuit pack placement
Circuit pack information
Circuit pack name
655A power supply
Redundant 655A power
supply
TN2312BP IPSI
Second TN2312BP IPSI
TN799DP (or greater
suffix) CLAN
TN2302 media processor
TN771 maintenance/test
board
Port circuit packs
Trunk circuit packs
2
Install the TN2312BP IPSI adapter on the connector panel in slot 1 for carrier A. If you are using
duplicated IPSIs, connect another IPSI adapter in position 1 for carrier B. Connect the CAT 5
ethernet cable to the adapter to connect the G650 Media Gateway to the ethernet. If you want to
use the external alarm function, attach an external alarm cable to the IPSI adapter.
G650 Media Gateway IPSI adapter,
54
CAUTION:
When handling circuit packs or any components of an G650 Media Gateway, always wear
an authorized wrist ground strap. Connect the strap to the ground connector provided on
the media gateway.
Table 6, G650 Media Gateway circuit pack placement,
Required or optional
Required
Optional
Required
Optional
Optional
Optional
One per customer
location
—
—
Figure 3, Front view of an G650 Media Gateway,
Placement information
Slot number Required or recommended
0 Required
15 If it is present, it must be in slot 15.
A01 Required
B01 If it is present, it must be in slot B01.
2 Recommended
14 Recommended
Any slot —
Slots on the Recommended
left
Slots on the Recommended
right
on page 55 shows the IPSI adapter.
Installing the Avaya G650 Media Gateway
on page 54
on page
Figure 14,
June 2004