Installing Circuit Packs In The G650 Media Gateway - Avaya G650 Installing

Installing circuit packs in the G650 Media Gateway

Circuit pack installation
!
CAUTION:
When handling circuit packs or any components of an G650 Media Gateway,
CAUTION:
always wear an authorized wrist ground strap. Connect the strap to the ground
connector provided on the media gateway.
Circuit pack slot loading
To load circuit packs:
1. Load all port circuit packs. See
page 59 for the recommended circuit pack layouts. Slots in the G650 Media Gateway are
numbered from left to right beginning with slot 0. See
Media Gateway
Table 5: G650 Media Gateway circuit pack placement
Circuit pack information
Circuit pack name
655A power supply
Redundant 655A
power supply
TN2312BP IPSI
Second TN2312BP
IPSI
TN799DP (or greater
suffix) CLAN
TN2302 media
processor
TN771 maintenance/
test board
Port circuit packs
Trunk circuit packs
Table 5: G650 Media Gateway circuit pack placement
on page 60.
Required or
optional
Required
Optional
Required
Optional
Optional
Optional
One per customer
location
—
—
Figure 13: Front view of an G650
Placement information
Slot Required or recommended
number
0 Required
15 If it is present, it must be in slot
15.
A01 Required
B01 If it is present, it must be in slot
B01.
2 Recommended
14 Recommended
Any slot —
Slots on the Recommended
left
Slots on the Recommended
right
Issue 2 January 2005
on
59