About This Documentation
Conventions
Perform tasks related to the Main Distribution Frame in the following sections as appropriate:
•
Installing the main distribution frame
•
Connecting the media gateway to the main distribution frame
•
Connecting the main distribution frame to stations and the public switched telephone network
page 123
Connect the necessary telephone, trunking, and peripheral equipment using the information in
and wiring telephones and trunks
page 189.
Complete the installation using information in the following sections:
•
Testing the complete configuration
Conventions
This section describes the conventions that we use in this book.
General
We show commands and screens from the newest Communication Manager and refer to the most current
documentation.
Physical dimensions
All physical dimensions are in English units followed by metric units in parentheses. Wire gauge
measurements are in AWG followed by the diameter in millimeters in parentheses.
Terminology
We use the following terminology in this documentation:
•
Configuration is a general term that encompasses all references to an Avaya media server with
media gateways running Communication Manager.
•
Cabinet refers to a stack of media gateways (such as the G650) that are TDM-cabled together. It is
the same as a port network. It can also refer to the MCC1 (multi-carrier cabinet).
•
UUCSS refers to a circuit pack address in cabinet-carrier-slot order.
•
Telephone and voice terminal have the same meaning.
•
ASAI is synonymous with the newer CallVisor ASAI.
Typography
This section describes the typographical conventions for commands, keys, user input, system output, and
field names.
14
on page 101
on page 153 and
Installing and wiring telephone power supplies
on page 207
Installing the Avaya G650 Media Gateway
on page 117
Installing
June 2004
on
on