Checking The Ventilation And The G650 Media Gateway Rack - Avaya G650 Installing

Figure 3, Front view of an G650 Media Gateway,
G650 Media Gateway.
Figure 3: Front view of an G650 Media Gateway
Figure notes
1 ESD ground jack
2 655A power supply
3 TN2312BP IP server interface circuit
pack (in carrier A or B only)
Checking the ventilation and the G650 Media
Gateway rack
!
Make sure there is adequate ventilation in the area. The internal room temperature must not exceed
o
104 F (40
The G650 Media Gateway should be installed in a well-ventilated area. Maximum equipment
performance is achieved at an ambient temperature between 40° and 120° F (4° and 49° C) for a short-
term operation (not more than 72 consecutive hours or 15 days in a year) and up to 104° F (40° C) for
continuous operation. The relative humidy range is 10% to 95% at up to 84 F (29° C).
34
3 4
1
Power 1 2 3
FAN OR POWER FAIL
FAN AND POWER OK
AC INPUT
DC INPUT
ACTIVE RING
2
WARNING:
o
C).
on page 34 shows the placement of circuit packs in the
4 5 6 7 8 9 10 11 12
4 TN799DP C-LAN
5 TN2302 IP Media Processor
Installing the Avaya G650 Media Gateway
5
13 14 Power
FAN OR POWER FAIL
FAN AND POWER OK
AC INPUT
DC INPUT
ACTIVE RING
2
scdlff02 LAO 081203
June 2004