High level overview of installation process
Installing and wiring telephones
This stage, in most cases, requires that the configuration be operational and responsive so you can test the
phones as they are wired and placed. Of course, there may be variations. IP telephones that are connected
to the customer's network could be placed well before completing the installation. When wiring is being
installed for traditional telephones and consoles (analog and/or digital), make every effort to place the
phones when they can be tested.
Completing the installation
This stage finishes the installation. Clearing alarms, enabling alarm reporting, backing up the servers,
hooking up the modems (if used) and registering the configuration. This stage will always come at the
end of the actual installation.
Testing the complete installation
This stage verifies the complete configuration operation and is always the last thing you do.
22
Installing the Avaya G650 Media Gateway
June 2004