Installing Circuit Packs In The G650 Media Gateway - Avaya G650 Installing

Installing circuit packs in the G650 Media Gateway

!
CAUTION:
When handling circuit packs or any components of an G650 Media Gateway,
CAUTION:
always wear an authorized wrist ground strap. Connect the strap to the ground
connector provided on the media gateway.
Tolinstall circuit packs:
1. Load all port circuit packs. See
Gateway for the recommended circuit pack layouts. Slots in the G650 Media Gateway are
numbered from left to right beginning with slot 0
Gateway on page 50).
Table 3: Circuit pack placement in the G650 Media Gateway
Circuit pack name
655A power supply
Redundant 655A
power supply
TN2312BP IPSI
Second TN2312BP
IPSI
TN750, TN750B,
TN750C Voice
Announcement
TN797
TN799DP (or greater
suffix) C-LAN
TN2302 media
processor
TN2602AP IP media
resource 320
TN771 maintenance/
test board
Installing circuit packs in the G650 Media Gateway
Table 3: Circuit pack placement in the G650 Media
Required or
optional
Required
Optional
Required
Optional
Optional
Optional
Optional
Optional
Required
One per customer
location
(Figure 18: Front view of a G650 Media
Slot Notes
number
0 Required
15 If present, must be in slot 15.
A01 Required
B01 If present, must be in slot B01.
Any slot —
Any slot —
2 Recommended
14 Recommended
Any slot Bearer duplication requires
two 2602AP circuit packs in
the same subnet.
Any slot —
Issue 2 February 2007
1 of 2
49