Checking Circuit Packs; Unpacking And Inspecting The Media Gateways-Mcc1 - Avaya G650 Installing

Figure 1: Equipment packed with a single G650 Media Gateway
Figure notes
1 ESD ground jack
2 655A power supply
3 TN2312BP IP server interface (IPSI)
circuit pack

Checking circuit packs

To check circuit packs:
1
Be sure all circuit packs are fully inserted into the proper slots according to the system diagram
provided by the project manager.
Report any discrepancies in circuit pack type or quantity to your Avaya representative.
For detailed circuit pack descriptions, see the Hardware Guide for the Avaya Communication
Manager (555-245-207).
For G650 Media server circuit pack comcodes, see
2
Check the any adjuncts shipped for damage and report all damage according to local shipping
instructions.
Unpacking and inspecting the media
gateways—MCC1
!
26
3 4
1
Power 1 2 3
FAN OR POWER FAIL
FAN AND POWER OK
AC INPUT
DC INPUT
ACTIVE RING
2
DANGER:
Use lifting precautions. A fully loaded MCC1 Media Gateway weighs as much as 800
pounds (363 kilograms) and may be top heavy. Use caution to avoid injury.
4 5 6 7 8 9 10 11 12
4 TN799DP CLAN (optional)
5 TN2302 IP media processor (optional)
Table 2, Comcodes for the G650,
Installing the Avaya G650 Media Gateway
5
13 14 Power
FAN OR POWER FAIL
FAN AND POWER OK
AC INPUT
DC INPUT
ACTIVE RING
2
scdlff02 LAO 081203
on page 29.
June 2004