Specifications; Ethernet Port; Command Port; Voice/Fax Channel 1 And 2 - Multitech MVP200 User Giude

Voice/fax over ip networks proprietary mode
Hide thumbs Also See for MVP200:
Table of Contents

Advertisement

Specifications

One 1 Meg by 32 byte at 70 nanosecond SIMM is 4 Mb DRAM
Caution: SIMM speed and size cannot be mixed
Two Megabytes of flash memory

Ethernet Port

Single Ethernet Interface - 10BASE-T (twisted pair) keyed RJ-45 connector.

Command Port

Single 19.2K bps asynchronous Command Port using an RJ-45 to DB9 cable with a DB9
female connector

Voice/Fax Channel 1 and 2

Two RJ-12 jacks (FXO and FXS)
One RJ-45 jack (E&M)

Electrical/Physical

Voltage - 115 VAC (Standard), 240 Volts AC (Optional)
Frequency - 47 to 63 Hz
Power Consumption - 18 Watts
Dimensions - 1.625" high x 6.175" wide x 9" deep
Weight - 2 pounds (0.9 kg)
(4.13 cm x 15.68 cm x 22.86 cm)
Chapter 1 - Introduction and Description
13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MVP200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Multivoip 200

Table of Contents