Introduction; Before You Begin - Multitech MVP200 User Giude

Chapter 4 - MultiVOIP Software

Introduction

This chapter describes various features of the MultiVOIP software that enable you to change (update)
the configuration of your MultiVOIP. The basic configuration parameters were established during the
loading of the software (Chapter 3). The MultiVOIP software and configuration utilities described in
this chapter enable you to change that initial configuration as necessary.
The primary interface to the MultiVOIP software is a main menu (with MultiVOIP 200 Setup in the
title bar) with individual buttons that enable you to quickly and easily select a desired function. These
features are discussed in detail in the MultiVOIP Configuration section later in this chapter.
The other six configuration utilities in the MultiVOIP 200 software provide additional functionality. The
Configuration port setup utility enables you to change the method by which you access the
MultiVOIP (through a direct connection of a PC to the Command Port on the MultiVOIP, or via your
Internet or LAN connection to the LAN port on the MultiVOIP). The Date and Time setup utility
enables you to easily set the date and time used for data logging in the MultiVOIP. Download
Factory Defaults enables you to return the configuration to the original factory settings. Download
Firmware enables you to download new versions of firmware as enhancements become available.
Download User Defaults enables you to repeat the download factory defaults process (part of
software installation) and update the MultiVOIP configuration with any necessary changes.
Download Voice Coders enables you to download voice coders to the MultiVOIP after repair or
upgrade. The Uninstall MultiVOIP Configuration utility removes most of the MultiVOIP 200
software from your PC.

Before You Begin

The MultiVOIP software operates in a Microsoft Windows® environment. The MultiVOIP 200
program group contains icons for all the utilities described above. In Windows 95/98/NT/2000, you
can access the individual utility programs either by clicking Start | Programs | MultiVOIP 200 |
(utility) , or by double-clicking the utility icon in the MultiVOIP 200 program group shown here:
39