Multitech MVP200 User Giude page 35

17. Click OK. After the upgrade is complete, click Start | Programs| MultiVOIP | MultiVOIP
Configuration. On the main menu, click Phone Book to display the Phone Directory Data-
base dialog box.
In the Database Type group, click the Client option. The Update Database From group
becomes active.
18. Enter the IP address of the host MultiVOIP in the Host IP Address box.
19. Click OK and you are returned to the main menu.
20. Click Download Setup to write the new configuration to the client unit. The Save Setup
dialog box displays.
20. Select the Save Current Setup as User Default Configuration check box and click OK.
After the setup is written to the MultiVOIP, the unit reboots.
22. Check that the Boot LED on the MultiVOIP is Off after the download is complete. This may
take several minutes as the MultiVOIP reboots.
23. You are returned to the main menu.
Your MultiVOIP is operational at this time.
Repeat this procedure for each of the client units. When all clients have been configured, proceed
with deploying the VOIP network.
Chapter 3 - Software Loading and Configuration
35