Regional - Multitech MVP200 User Giude

Chapter 4 - MultiVOIP Software
The Authentication Option enables you to provide Password Protection on Inbound and/or
Outbound calls on any of the three interfaces (FXO, FXS, and E&M). A password of up to 14 numeric
characters can be assigned to either or both voice/fax channels. The required password must then
be entered from the device initiating a call over the protected voice/fax channel.
The Automatic Disconnect Option enables you to limit the duration of a call on any of the three
interfaces (FXO, FXS, or E&M). This function will hang up the call when a timer expires. The default
timer value of 15 seconds can be increased to any value up to 65535 seconds (roughly 18 hours).

Regional

The regional tab controls the voice communications for the country or region in which the MultiVOIP
is being used.
From the Country/Region list you can select the country or region for which you are configuring the
MultiVOIP. The Tone Pairs group always displays the tones used in the country or region currently
selected. In addition to Australia, Central America, Chile, Europe, France, Japan, UK, and USA,
there is a Custom selection (with defaults identical to USA) that will make the Custom button active.
Clicking Custom enables you to edit the Tone Pairs and establish custom sets of tone pairs for Dial
Tone, Ring, and Busy on a Custom Tone Pair Settings dialog box.
The Pulse Generation Ratio group contains two ratios: the 60/40 is for the USA, and the 67/33 ratio
is for international applications.
44