Radyne DMD50 Installation And Operation Manual page 62

Universal satellite modem
Hide thumbs Also See for DMD50:
Table of Contents

Advertisement

DMD50 Universal Satellite Modem
NOMINAL TX POWER
MINIMUM TX POWER
MAXIMUM TX POWER
TARGET Eb/No
TM118 – Rev. 1.1
{0 TO -25 dB}
This allows the user to set the nominal Transmit Power.
The nominal transmit power is the default output power
level.
{0 to -25 dB}
This allows the user to set the minimum Transmit Power.
EFDATA AUPC: When configured for EFDATA AUPC
the minimum Transmit Power is the lowest power setting
that will be used when the local modem commands a
decrease of the Transmit Power from the Remote
modem.
RADYNE: When configured for Radyne AUPC, the
minimum Transmit Power is the lowest power setting
that will be used when the remote modem commands a
decrease of the Transmit Power from the Local modem.
NEARSIDE: When configured for NEARSIDE AUPC the
minimum Transmit Power is the lowest power setting
that will be used by the local modem when the Eb/No
increases above the Eb/No target.
{0 to -25 dB}
This allows the user to set the maximum Transmit
Power.
EF AUPC: When configured for EF AUPC, the
maximum Transmit Power is the highest power setting
that the local modem will use when the local modem
commands an increase in Transmit power from the
Remote modem.
RADYNE: When configured for Radyne AUPC, the
maximum Transmit Power is the highest power setting
that will be used when the remote modem commands an
increase of the Transmit Power from the Local modem
NEARSIDE: When configured for NEARSIDE AUPC the
maximum Transmit Power is the highest power setting
that will be used by the local modem when the Eb/No
decreases below the Eb/No target.
{4.0 to 16 dB}
This allows the user to set the desired E
receiver.
RADYNE AUPC: When configured for Radyne AUPC,
this setting is compared against the remote E
commands to the local modem to increase or decrease
the local transmit power.
EF AUPC: When configured for EF AUPC, this setting
is compared against the local received E
commands to the remote modem to increase or
decrease transmit power.
User Interfaces
/N
for the local
b
o
/N
and
b
o
/N
and
b
o
4-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm118

Table of Contents