Radyne DMD50 Installation And Operation Manual page 66

Universal satellite modem
Hide thumbs Also See for DMD50:
Table of Contents

Advertisement

DMD50 Universal Satellite Modem
IF (menu)
FREQUENCY (MHz)
SPECTRUM
MODULATION
SPECTRAL MASK
SWEEP RANGE (kHz)
SWEEP DELAY (Sec)
REACQ RANGE (Hz)
ADJ CARRIER PWR
FAST ACQUISITION
The maximum symbol rate for Fast Acquistion is 1028Ksps.
Fast Acquistion must be disable for rates greater than 1028Ksps.
Only supports QPSK and 8PSK in a NON-DVB MODE.
Does not support spectral inversion applications.
TM118 – Rev. 1.1
{50 – 90 MHz, 100 – 180 MHz, or 950 - 2050 MHz}
Allows the user to enter the Modulator IF Frequency in 1
Hz increments.
{NORMAL INVERTED}
Allows the user to invert the direction of rotation for PSK
Modulation. Normal meets the IESS Specification.
{QPSK, BPSK, OQPSK, 8PSK, 16QAM}
Allows the user to select the demodulation type.
{Intelsat 0.35, DVB 0.35, DVB 0.25, DVB 0.20}
Allows the user to set the spectral shape of Tx Data
Filter.
{±0 to 255 kHz}
Allows the user to set the acquisition range for the
demodulator
{0.0 – 6553.5 sec}
Allows the user to set the reacquisition delay time in
th
1/10
second increments.
{0 – 65535 Hz}
Allows the user to set the reacquisition sweep in 1 Hz
increments.
{Normal, Supressed}
Allows the user to indicate adjacent carrier as Normal or
Supressed (High Power). Unit will increase or decrease
post decimination gain appropriately.
{DISABLED, ENABLED}
Allows the user to disable or enable the Rx fast
acquisition capability.
Limitations of Fast Acquistion:
User Interfaces
4-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm118

Table of Contents