Radyne DMD50 Installation And Operation Manual page 91

User Interfaces
I OFFSET
Q OFFSET
IF RX LVL OFFSET
LB RX LVL OFFSET
POWER SOURCE
TERR INTFC BRD
CODEC BOARD (menu)
TPC FPGA IMAGE
RS FPGA IMAGE
TPC CODEC IMAGE
FRONT PANEL BOARD
FEATURES (menu)
5012.2840.2417
UPGRADE LIST (menu) The following identifies the available upgrade features:
4-38
Allows the user to adjust the internal frequency
reference for calibration. Only displayed if the system
reference clock source is HI STABILITY.
Used for factory test only.
Used for factory test only.
Used for factory test only.
Used for factory test only.
Used for factory test only.
Indicates the Radyne assembly number for the
Terrestrial Interface Assembly.
Indicates the Radyne part number for the Codec Board.
Used for factory test only.
Used for factory test only.
Used for factory test only.
Indicates the Radyne assembly number for the front
panel board.
{____.____.____}
Allows the user to install purchased feature upgrades
(see Appendix A).
Contact the Radyne Customer Service Department or
Sales for hardware and software upgrades.
10 MBPS, 20 MBPS, 52 MBPS (The highest option installed will hide the
lower rates.)
RXIF
RXLBAND
TXIF
TXLBAND
ENH ASYNC
IDR
SEQ
DMD50 Universal Satellite Modem
TM118 – Rev. 1.1