Table of Contents
Advertisement
User Interfaces
SCC CTL RATIO
SCC INBAND RATE
TERR FRAMING
DATA POLARITY
SYMBOL PAIR
ESC OVERHEAD
AUPC (menu)
LOCAL AUPC (menu)
AUPC MODE
4-8
{1/1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/7},
Allows the user to simulate the framing used by the
Satellite Control Channel Option (Pass Thru Mode only).
The SCC CTL RATIO is the ratio of overhead in-band
data to synchronizing words.
Only displayed when SCC Framing is selected
{300 to 200000}, when using SCC Framing
Allows the user to request the rate of in-band data for
the overhead channel.
Only displayed when SCC Framing is selected
{NONE, 188, 204}, when using DVB Network
Specifications
{INV. TERR & BASE, INV. BASEBAND, INV.TERR
DATA, NONE}
Allows the user to invert the Tx Data polarity.
{NONE, SWAPPED}
Allows the user to swap the I & Q Channels, when using
BPSK modulation.
{VOICE X2, DATA 64KBPS}
IDR ESC Channel used for Voice or 64 K data channel.
Only available when IDR Network is selected.
The 'LOCAL AUPC CONFIGURATION' Menu contains
the local configuration parameters for the AUPC
Function.
{DISABLED, NEARSIDE, RADYNE, EFDATA}
DISABLED: Allows the user to enable or disable the
Local AUPC Function of the local modem.
EFDATA: Enables EFDATA Local AUPC Function. In
the event that the remote or local demodulator losses
lock, the output power level will adjust itself to the level
settings indicated in the 'REMOTE CL ACTION' Menu or
the 'LOCAL CL ACTION'.
RADYNE: Enables Radyne Local AUPC Function. In
the event the remote demodulator losses lock, the local
output power level will adjust itself to the nominal level.
This nominal power should be set to a level high enough
to re-establish communications regardless of rain fade.
NEARSIDE: Enables NEARSIDE Local AUPC function.
In the event the local demodulator losses lock due to
signal loss, the output power level will adjust itself to the
nominal level. This nominal power should be set to a
level high enough to re-establish communications
regardless of rain fade.
DMD50 Universal Satellite Modem
TM118 – Rev. 1.1
Advertisement
Table of Contents
