Table of Contents
Advertisement
DMD50 Universal Satellite Modem
AUTH PASSWORD
USER RESET
HW/FW CONFIG (menu)
FIRMWARE REV
M&C REV
MAIN BOARD (menu)
Only the appropriate of the VCO adjustment screens listed below will be
displayed. These are protected fields, to prohibit accidental changes. To
edit the field, the user must depress all four of the direction arrow keys
simultaneously.
INT VCO ADJUST
HI STAB VCO ADJUST {0% - 100%}
LARGEST HB GAP
SOFT RESET
IF BOARD (menu)
AGC/CTRL/VALUE
TM118 – Rev. 1.1
{xxxxxxxx}
User to select password. The user can modify the
Authorization Passwords. The user name can have up to
14 characters supporting alpha and numeric characters.
Alpha characters can be entered using the up and down
arrow keys. Numeric characters can be selected by
using the number keys on the front panel. The user can
clear all characters from the front panel screen.
Resets group and password.
Displays the installed firmware revision.
Displays the installed Monitor and Control revision.
{0% - 100%}
Allows the user to adjust the internal frequency
reference for calibration. Only displayed of the system
reference clock is INTERNAL.
Allows the user to adjust the internal frequency
reference for calibration. Only displayed if the system
reference clock source is HI STABILITY.
Used for factory test only.
{Enter}
Indicates the Radyne
Assembly.
{0% - 100%}
User Interfaces
part number for the IF Board
4-37
Advertisement
Table of Contents
