User Interfaces
REF FREQ SRC
REF FREQ (MHz)
TX ASYNC MODE (menu)
TX ASYNC MODE
ES INTERFACE
ES BAUD RATE
ES BITS/CHAR
RX ES ENHANCED (menu)
RX ASYNC MODE
ES INTERFACE
ES BAUDRATE
ES BITS/CHAR
4-20
{INTERNAL, EXTERNAL, HIGH STABILITY}
Allows the user to select the Frequency Reference
Source. High Stability is only displayed if the appropriate
hardware is detected.
Allows the user to select the reference clock frequency
in MHz.
{ES-ES, ESC ENHANCED}
ES-ES is the normal IBS Async Channel. ESC
Enhanced can be selected in Closed Net and uses the
Overhead Signaling bytes in the IBS Overhead to pass
asynchronous data.
{RS-232, RS-485}
Allows the user to select the interface type.
{150 - 19200}
Allows the user to select the baud rate in Enhanced
Async Mode. Available rates are listed in Table 3-3.
{7,8}
Allows the user to choose between 7 or 8 bit data.
{ES-ES, ESC ENHANCED}
ES-ES is the normal IBS Async Channel. ESC
Enhanced can be selected in Closed Net and uses the
Overhead Signaling bytes in the IBS Overhead to pass
asynchronous data.
{RS-232, RS-485}
Allows the user to select the interface type.
{150 – 19200}
Allows the user to select the Baud rate in Enhanced
Async Mode.
{7,8}
Allows the user to choose between 7 or 8 bit data.
DMD50 Universal Satellite Modem
TM118 – Rev. 1.1