Table of Contents
Advertisement
User Interfaces
REMOTE PORT (menu)
ADDRESS
BAUD RATE
INTERFACE
TCP/IP (menu)
BOOT MODE
4-32
{32 - 255}
Allows the user to enter the Remote Port Multidrop
Address.
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600}
Allows the user to enter the Remote Port Baud Rate.
{RS-232, RS-485}
Allows the user to enter the Remote Port interface type.
{DEFAULT, NON-VOL, BOOTP, IP TEST}
DEFAULT: During initialization (boot up), the modem will restore the
web setting to the standard IP Mask and addresses supplied by the
modem. The modem will be taken off the network and will not be
accessible. The Default settings are:
IP Address Mask:
Modem IP Address:
Server IP Address:
Router IP Address:
BOOTP:
During initialization (boot up), the modem will get the
names, masks, and IP Addresses of the modem, router,
and server.
NON-VOL: Stores and uses IP Mask and addresses as provided by
the user.
IP TEST:
Stores and uses IP Mask and addresses to fixed settings as
listed below.
Bootp Server Tag:
IP Address Mask:
Modem IP Address:
Server IP Address:
Router IP Address:
BOOTp SERVER
Only used if Bootp is selected in Boot Mode. Should be
consistent with the tag expected by the users Bootp
Server.
MODEM HOST The Host Modem for the network.
DMD50 Universal Satellite Modem
255.000.000.000
010.000.000.001
010.001.001.001
010.000.001.001
206
255.255.255.000
192.168.0.238
192.168.000.101
192.168.000.102
{128 – 257, default is 206}
(FF.00.00.00 hex)
(C0.A8.00.EE hex)
(0A.01.01.01 hex)
(0A.00.01.01 hex)
(FF.FF.FF.00 hex)
(C0.A8.00.EE)
(C0.A8.00.65)
(C0.A8.00.66)
TM118 – Rev. 1.1
Advertisement
Table of Contents
