Table of Contents
Advertisement
Appendix F
The web user database consists of three users (USER 1, USER 2, USER 3), with initial default
names of guest, oper, and admin. Access rights and authentication make it possible to restrict
access to a specified set of web users. There are three levels of security privileges that can be
assigned to any user. They are:
•
GUEST: Users are able to navigate most of the site, and view modem parameter
settings.
•
OPER: Users can monitor and control modem parameter settings, and change their own
authentication passwords.
•
ADMIN: At this highest access right, users can monitor and control modem parameter
settings, change any user's name and authentication password, and modify IP network
settings. This setting has full access to the entire site.
•
NO GROUP: Assigning this will block all access from the site.
Listed in the table below are the factory default user names and corresponding default passwords
and settings:
USER ID
USER 1
USER 2
USER 3
Using the Front Panel display and arrow keys, scroll thru the System menu until the WEB sub
menu is displayed. Enter into the WEB menu and the following Sub menus will appear (order
may vary).
CONFIRMATION: When ENABLED, a change in the Web Interface will prompt a
1.
secondary window to be displayed asking "Do you want to proceed". This will allow the
user to either OK the change or cancel the change. When this feature is DISABLED, the
command will be executed upon entering the command or parameter change.
Commands pertaining to frequency and data rates cannot be overridden. The
Confirmation command is located under PASSWORD SETUP/PREFERENCES.
F-2
Access
Authentication
Group
Password
GUEST
guest
OPER
oper
ADMIN
admin
All entries are case sensitive.
DMD50 Universal Satellite Modem
Web User
guest
oper
admin
TM118 – Rev. 1.1
Advertisement
Table of Contents
