Radyne DMD50 Installation And Operation Manual page 70

DMD50 Universal Satellite Modem
SCT CLK SRC
DROP & INSERT (menu)
DROP MODE
MAP COPY
SAT CH TERRCH
ESC CHAN#1 (dB)
ESC CHAN#2 (dB)
TM118 – Rev. 1.1
{SCT, SCR}
Allows the user to select SCT Source.SCT is the
internally generated SCT clock. SCR is the Rx Satellite
clock. SCR us used for loop timing.
(Reference Section 3.13, "Drop and Insert Mapping" in
this manual)
{NONE, T1-D4, T1-ESF, PCM-30, PCM-30C, PCM-31,
PCM-31C, T1-D4-S, T1-ESF-S.}
Drop mode may only be changed from none when the
drop and insert specification is in use.
{SRC Map Dest Map}
Allows the user to copy drop and insert maps. Tx Act
map is the drop map currently being used by the
modem. Source and destination may be any of the
following:
TX ACT, RX ACT, TX EDIT, RX EDIT,
USER 1 - USER 8, ROM 1 -ROM 8
{1-31 1-31}
The up/down arrow keys allow you to traverse the sat
terr pairings. The slot numbers may be edited using the
keypad.
Allows the user to edit the Tx Edit map and specify the
terrestrial slots that will be dropped into the assigned
satellite channels. The satellite channels are fixed and
the number of channels are determined by the data rate.
The terrestrial time slots available are determined by the
drop mode. When the user has finished editing the Tx
Edit map, it must be copied to the Tx Act map before it
will be used by the modem.
{-20 to +10 dB}
Allows user to select ESC Voice Channel Gain. Only
displayed when IDR NETWORK and VOICE Channel
are selected.
{-20 to +10 dB}
Allows user to select ESC Voice Channel Gain. Only
displayed when IDR NETWORK and VOICE Channel
are selected.
User Interfaces
4-17