Preface - TP-Link JetStream TL-SL3428 Cli Reference Manual

TL-SL3428 JetStream L2 Managed Switch CLI Guide

Preface

This Guide is intended for network administrator to provide referenced information about CLI
(Command Line Interface). The device mentioned in this Guide stands for TL-SL3428 JetStream
L2 Managed Switch.
Overview of this Guide
Chapter 1: Using the CLI
Provide information about how to use the CLI, CLI Command Modes, Security Levels and some
Conventions.
Chapter 2: User Interface
Provide information about the commands used to switch between five CLI Command Modes.
Chapter 3: IEEE 802.1Q VLAN Commands
Provide information about the commands used for configuring IEEE 802.1Q VLAN.
Chapter 4: Protocol VLAN Commands
Provide information about the commands used for configuring Protocol VLAN.
Chapter 5: Voice VLAN Commands
Provide information about the commands used for configuring Voice VLAN.
Chapter 6: GVRP Commands
Provide information about the commands used for configuring GVRP (GARP VLAN registration
protocol).
Chapter 7: LAG Commands
Provide information about the commands used for configuring LAG (Link Aggregation Group).
Chapter 8: LACP Commands
Provide information about the commands used for configuring LACP (Link Aggregation Control
Protocol).
Chapter 9: User Manage Commands
Provide information about the commands used for user management.
Chapter 10: Binding Table Commands
Provide information about the commands used for binding the IP address, MAC address, VLAN
and the connected Port number of the Host together.
Chapter 11: ARP Inspection Commands
Provide information about the commands used for protecting the switch from the ARP cheating or
ARP Attack.
1