Dot1X Retry; Dot1X - TP-Link JetStream TL-SL3428 Cli Reference Manual

Global Configuration Mode
Example
Configure the Quiet Period and the SupplicantTimeout as 12 seconds and 6
seconds:
TP-LINK(config)# dot1x timer quiet-period 12 supp-timeout 6

dot1x retry

Description
The dot1x retry command is used to configure the maximum transfer times of
the repeated authentication request. To restore to the default value, please use
no dot1x retry command.
Syntax
dot1x retry retry-time
no dot1x retry
Parameter
retry-time ——The maximum transfer times of the repeated authentication
request, ranging from 1 to 9 in times. By default, the value is 3.
Command Mode
Global Configuration Mode
Example
Configure the maximum transfer times of the repeated authentication request as
5:
TP-LINK(config)# dot1x retry 5

dot1x

Description
The dot1x command is used to enable the IEEE 802.1X function for a specified
port. To disable the IEEE 802.1X function for a specified port, please use no
dot1x command.
Syntax
TL-SL3428 JetStream L2 Managed Switch CLI Guide
69