Radius Authentication Primary-Ip - TP-Link JetStream TL-SL3428 Cli Reference Manual

Authentication for access.
Port-based: All the clients connected to the port can access the network on the
condition that any one of the clients has passed the 802.1X Authentication.
By default, the Control Type is mas-based.
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
Example
Configure the Control Type for port 5 as port-based:
TP-LINK(config)# interface ethernet 5
TP-LINK(config-if)# dot1x port-method port-based

radius authentication primary-ip

Description
The radius authentication primary-ip command is used to configure the IP
address of the authentication server. Authentication server provides the
authentication service for the switch via the stored client information, such as
the user name, password, etc, with the purpose to control the authentication and
accounting status of the clients. The RADIUS（Remote Authentication Dial-In
User Service）server is used as the Authentication server generally.
Syntax
radius authentication primary-ip ip-addr
Parameter
ip-addr —— The IP address of the authentication server.
Command Mode
Global Configuration Mode
Example
Configure the IP of the authentication server as 10.20.1.100:
TP-LINK(config)# radius authentication primary-ip 10.20.1.100
TL-SL3428 JetStream L2 Managed Switch CLI Guide
72