Chapter 6 Gvrp Commands; Gvrp; Gvrp (Interface) - TP-Link JetStream TL-SL3428 Cli Reference Manual

Chapter 6
GVRP (GARP VLAN registration protocol) is an implementation of GARP (generic attribute
registration protocol). GVRP allows the switch to automatically add or remove the VLANs via the
dynamic VLAN registration information and propagate the local VLAN registration information to
other switches, without having to individually configure each VLAN.

gvrp

Description
The gvrp command is used to enable the GVRP function globally. To disable the
GVRP function, please use no gvrp command.
Syntax
gvrp
no gvrp
Command Mode
Global Configuration Mode
Example
Enable the GVRP function globally:
TP-LINK(config)# gvrp

gvrp (interface)

Description
The gvrp(interface) command is used to enable the GVRP function for the
desired port. To disable the GVRP function of this port, please use no gvrp
command. The GVRP feature can only be enabled for the trunk-type ports.
Syntax
gvrp
no gvrp
Command Mode
Interface Configuration Mode（interface ethernet / interface range ethernet）
TL-SL3428
GVRP Commands
JetStream L2 Managed Switch CLI Guide
29