Chapter 2 User Interface; Enable; Enable Password - TP-Link JetStream TL-SL3428 Cli Reference Manual

Chapter 2

enable

Description
The enable command is used to access Privileged EXEC Mode from User
EXEC Mode.
Syntax
enable
Command Mode
User EXEC Mode
Example
If you have set the password to access Privileged EXEC Mode from User EXEC
Mode:
TP-LINK>enable
Enter password：
TP-LINK#

enable password

Description
The enable password command is used to set the password for users to
access Privileged EXEC Mode from User EXEC Mode. To return to the default
configuration, please use no enable password command.
Syntax
enable password password
no enable password
Parameter
password —— super password ， which contains 16 characters at most,
composing digits, English letters and underdashes only. By default, it is empty.
Command Mode
Global Configuration Mode
Example
Set the super password as admin to access Privileged EXEC Mode from User
EXEC Mode:
TP-LINK(config)# enable password admin
TL-SL3428
User Interface
JetStream L2 Managed Switch CLI Guide
13