Link-Aggregation Hash-Algorithm; Description - TP-Link JetStream TL-SL3428 Cli Reference Manual

link-aggregation hash-algorithm

Description

The link-aggregation hash-algorithm command is used to configure the
Aggregate Arithmetic for LAG.
Syntax
link-aggregation hash-algorithm {src_dst_mac | src_dst_ip }
Parameter
src_dst_mac —— The source and destination MAC addresses.
src_dst_ip ——The source and destination IP addresses.
Command Mode
Global Configuration Mode
Example
Configure the Aggregate Arithmetic for LAG as src_dst_mac:
TP-LINK(config)# link-aggregation hash-algorithm src_dst_mac
description
Description
The description command is used to set a description for an aggregation group.
To remove the description of an aggregation group, please use no description
command.
Syntax
description description
no description
Parameter
description——The description of LAG, which contains 16 characters at most.
Command Mode
Interface Configuration Mode（interface link-aggregation）
Example
Set the description "movie server" for aggregation group1:
TL-SL3428 JetStream L2 Managed Switch CLI Guide
35