Igmp-Snooping Filter-Add; Igmp-Snooping Filter-Config - TP-Link JetStream TL-SL3428 Cli Reference Manual

Command Mode
Global Configuration Mode
Example
Add static multicast IP address 225.0.0.1, which correspond to VLAN 2, and
configure the forward port as port 1:
TP-LINK(config)# igmp-snooping static-entry-add 225.0.0.1 2 1

igmp-snooping filter-add

Description
The igmp-snooping filter-add command is used to configure the multicast
IP-range desired to filter. To delete the corresponding IP-range, please use no
igmp-snooping filter-add command. When IGMP Snooping is enabled, you
can specified the multicast IP-range the ports can join so as to restrict users
ordering multicast programs via configuring multicast filter rules. Multicast IP
addresses ranges from 224.0.0.0 to 239.255.255.255. The range for receivers
to join is from 224.0.1.0 to 239.255.255.255.
Syntax
igmp-snooping filter-add {id} {start-ip} {end-ip}
no igmp-snooping filter-add {id}
Parameter
id —— IP-range ID, ranging from 1 to 30.
start-ip —— The start multicast IP of the IP-range.
end-ip —— The end multicast IP of the IP-range.
Command Mode
Global Configuration Mode
Example
Add multicast IP-range 225.0.0.1~225.0.0.4 to filter, and specify the IP-range ID
as 20:
TP-LINK(config)# igmp-snooping filter-add 20 225.0.0.1 225.0.0.4

igmp-snooping filter-config

Description
TL-SL3428 JetStream L2 Managed Switch CLI Guide
160